Isner, Nancy D COMPUTATIONAL STUDY OF EFFECT OF NANOSECOND ELECTRIC PULSE PARAMETERS ON PLASMA SPECIES GENERATION <p>Multiple industry applications, including combustion, flow control, and medicine, have leveraged nanosecond pulsed plasma (NPP) discharges to create plasma generated reactive species (PGRS). The PGRS are essential to induce plasma-assisted mechanisms, but the rate of generation and permanence of these species remains complex. Many of the mechanisms surrounding plasma discharge have been discovered through experiments, but a consistent challenge of time scales limits the plasma measurements. Thus, a well-constructed model with experimental research will help elucidate complex plasma physics. The motivation of this work is to construct a feasible physical model within the additional numerical times scale limitations and computational resources. This thesis summarizes the development of a one-moment fluid model for NPP discharges, which are applied due to their efficacy in generating ionized and excited species from vacuum to atmospheric pressure. </p><p>From a pulsed power perspective, the influence of pulse parameters, such as electric field intensity, pulse shape and repetition rate, are critical; however, the effects of these parameters on PGRS remain incompletely characterized. Here, we assess the influence of pulse conditions on the electric field and PGRS computationally by coupling a quasi-one-dimensional model for a parallel plate geometry, with a Boltzmann solver (BOLSIG+) used to improve plasma species characterization. We first consider a low-pressure gas discharge (3 Torr) using a five-species model for argon. <a>We then extend to a 23 species model with a reduced set of reactions for air chemistry remaining at low pressure.</a> The foundations of a single NPP is first discussed to build upon the analysis of repeating pulses. Because many applications use multiple electric pulses (EPs) the need to examine EP parameters is necessary to optimize ionization and PGRS formation. </p><p>The major goal of this study is to understand how the delivered EP parameters scale with the generated species in the plasma. Beginning with a similar scaling study done by Paschen we examine the effects of scaling pressure and gap length when the product remains constant for the two models. This then leads to our study on the relationship of pulsed power for different voltages and pulse widths of EPs. By fixing the energy delivered to the gap for a single pulse we determine that the electron and ion number densities both increased with decreasing pulse duration; however, the rate of this increase of number densities appeared to reach a limit for 3 ns. These results suggest the feasibly of achieving comparable outputs using less expensive pulse generators with higher pulse duration and lower peak voltage. Lastly, we study these outcomes when increasing the number of pulses and discuss the effects of pulse repetition and the electron temperature.</p><p>Future work will extend this parametric study to different geometries (i.e. pin-to-plate, and pin-to pin) and ultimately incorporate this model into a high-fidelity computational fluid dynamics (CFD) model that may be compared to spectroscopic results under quiescent and flowing conditions will be discussed.<br></p> Nanosecond Electric Pulses;Pulsed power;Gas discharges;Numerical methods;Finite difference;Computational Physics;Plasma Physics; Fusion Plasmas; Electrical Discharges;Electrostatics and Electrodynamics 2020-07-29
    https://hammer.purdue.edu/articles/thesis/COMPUTATIONAL_STUDY_OF_EFFECT_OF_NANOSECOND_ELECTRIC_PULSE_PARAMETERS_ON_PLASMA_SPECIES_GENERATION/12732830
10.25394/PGS.12732830.v1