Dynamics of Thin Fi lms near Singularities under the Influence of non-Newtonian Rheology

2019-01-02T18:55:36Z (GMT) by Vishrut Garg
<div>Free surface flows where the shape of the interface separating two fluids is unknown <i>apriori</i> are an important area of interest in fluid dynamics. The study of free surface flows such as the breakup and coalescence of drops, and thinning and rupture of fi lms lends itself to a diverse range of industrial applications, such as inkjet printing, crop spraying, foam and emulsion stability, and nanolithography, and helps develop an understanding of natural phenomena such as sea spray generation in oceans, or the dynamics of tear fi lms in our eyes. In free surface flows, singularities are commonly observed in nite time, such as when the radius of a thread goes to zero upon pinchoff or when the thickness of a film becomes zero upon rupture. Dynamics in the vicinity of singularities usually lack a length scale and exhibit self-similarity. In such cases, universal scaling laws that govern the temporal behavior of measurable physical quantities such as the thickness of a lm can be determined from asymptotic analysis and veri ed by high-resolution experiments and numerical simulations. These scaling laws provide deep insight into the underlying physics, and help delineate the regions of parameter space in which certain forces are dominant, while others are negligible. While the majority of previous works on singularities in free-surface flows deal with Newtonian fluids, many fluids in daily use and industry exhibit non-Newtonian rheology, such as polymer-laden, emulsion, foam, and suspension flows.</div><div><br></div><div><div>The primary goal of this thesis is to investigate the thinning and rupture of thin fi lms of non-Newtonian fluids exhibiting deformation-rate-thinning (power-law) rheology due to attractive intermolecular van der Waals forces. This is accomplished by means of intermediate asymptotic analysis and numerical simulations which utilize a robust Arbitrary Eulerian-Lagrangian (ALE) method that employs the Galerkin/Finite-Element Method for spatial discretization. For thinning of sheets of power-law fluids, a signi cant fi nding is the discovery of a previously undiscovered scaling regime where capillary, viscous and van der Waals forces due to attraction between the surfaces of the sheet, are in balance. For thinning of supported thin fi lms, the breakdown of the lubrication approximation used almost exclusively in the past to study such systems, is shown to occur for fi lms of power-law fluids through theory and con rmed by two dimensional simulations. The universality of scaling laws determined for rupture of supported fi lms is shown by studying the impact of a bubble immersed in a power-law fluid with a solid wall.</div></div><div><br></div><div><div>Emulsions, which are ne dispersions of drops of one liquid in another immiscible liquid, are commonly encountered in a variety of industries such as food, oil and gas, pharmaceuticals, and chemicals. Stability over a speci ed time frame is desirable in some applications, such as the shelf life of food products, while rapid separation into its constituent phases is required in others, such as when separating out brine from crude oil. The timescale over which coalescence of two drops of the dispersed phase occurs is crucial in determining emulsion stability. The drainage of a thin fi lm of the outer liquid that forms between the two drops is often the rate limiting step in this process. In this thesis, numerical simulations are used to decode the role played by fluid inertia in causing drop rebound, and the subsequent increase in drainage times, when two drops immersed in a second liquid are brought together due to a compressional flow imposed on the outer liquid. Additionally, the influence of the presence of insoluble surfactants at the drop interface is studied. It is shown that insoluble surfactants cause a dramatic increase in drainage times by two means, by causing drop rebound for small surfactant concentrations, and by partially immobilizing the interface for large surfactant concentrations.</div></div>