Purdue University Graduate School
Browse
Photogrammetry_v6.pdf (15.03 MB)

PHOTOGRAMMETRY FOR 3D RECONSTRUCTION IN SOLIDWORKS AND ITS APPLICATIONS IN INDUSTRY

Download (15.03 MB)
thesis
posted on 2019-08-15, 18:32 authored by Nikhil Satyanarrayan PotabattiNikhil Satyanarrayan Potabatti
Photogrammetry and laser scanning are two primary methods used for object reconstruction / reverse engineering. But Laser scanners have much higher initial investment compared to photogrammetry method.
Currently, in the industry, researchers have been using 3 different softwares for reverse engineering purposes from photogrammetry/laser scanning.

This thesis is to showcase research work with following points:
1. Comparison between laser scanner and photogrammetry tools.
2. Application of photogrammetry in the industry.
3. Evaluation of photogrammetry tools based on quality of mesh results and comparison with baseline standard of laser-scanner results.
4. Proposed integrated methodology with photogrammetry tool for reverse engineering within single environment.
5. Validation of this integrated methodology with case studies.
6. Parametric study of tool for accuracy and comparison with actual standard models.

History

Degree Type

  • Master of Science in Mechanical Engineering

Department

  • Mechanical Engineering

Campus location

  • Indianapolis

Advisor/Supervisor/Committee Chair

Dr. Hazim El-Mounayri

Additional Committee Member 2

Dr. Jie Chen

Additional Committee Member 3

Dr. Sohel Anwar

Usage metrics

    Licence

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC