2020.10.6 Mather.pdf (4.66 MB)

An Exergetic Comparison of Copper Extraction from Chalcopyrite Concentrates by Pyrometallurgy and Hydrometallurgy

Download (4.66 MB)
posted on 16.12.2020, 15:14 by Paul Mather
Copper is an essential metal in today’s economy, due to its superior electrical and thermal conductivities, alloying properties, and chemical uses. Most copper is produced viamining and refining, and most copper is found in the earth’s crust as chalcopyrite, CuFeS2. Typically, chalcopyrite is concentrated and fed to a high temperature pyrometallurgical process which produces >99.99% purity copper cathodes. Recently, Freeport-McMoRan Inc. has implemented a hydrometallurgical autoclave-leaching process that takes chalcopyrite concentrate and produces copper cathodes. It is imperative that these pyrometallurgical and hydrometallurgical processes be modeled and compared so that the extraction industry can best decide which technology to apply in the future. This work presents transient, reduced-order models for the comparison of the two processes using exergy balances. Exergy is typically thought of as the maximum work extractable from a system as it spontaneously reacts to the state of the surrounding environment; for extractive processes, it is also helpful to think of exergy as the minimum work required to effect a concentration, e.g. of copper. Exergy balances are thus similar to first law balances, but they comment on the location and magnitude of usefulenergy flows, instead of energy flows in general. For the baseline case, this work found that the pyrometallurgical process up to 99.5% copper anode stored 54% of the fed exergy in product, lost 20% of the fed exergy, and destroyed the remaining 26%. In contrast, the hydrometallurgical process up to 30 grams-per-liter copper pregnant-leach-solution stored 5% of the fed exergy in product, lost 9% of the fed exergy, and destroyed the remaining 86%. The effects of process variations are also looked at. It is recommended that this work be incorporated in whole-plant exergy balances to more precisely examine the tradeoffs between the pyrometallurgical and hydrometallurgical routes of copper extraction from chalcopyrite concentrates.


Freeport-McMoRan Inc.


Degree Type

Doctor of Philosophy


Materials Engineering

Campus location

West Lafayette

Advisor/Supervisor/Committee Chair

Dr. Matthew J. M. Krane

Additional Committee Member 2

Dr. Kenneth H. Sandhage

Additional Committee Member 3

Dr. Kevin P. Trumble

Additional Committee Member 4

Dr. Neera Jain